SAWEDGE CHAIN COLLECTION
SawEdge PRO 20" Chainsaw Chain – .325", .050", 80DL
The right fit. Your choice of cutting edge.
Check your fit: confirm pitch, gauge and drive links before ordering.
Will this chain fit my saw?
Match the pitch, gauge and drive-link count shown for this product to your saw and guide bar. Bar length and model name alone do not confirm fit.
3/8-inch Low Profile and standard 3/8-inch chain are different. If your saw has a replacement bar, check its current markings.
Semi-Chisel or Full-Chisel?
Semi-Chisel: a rounded cutting corner that is more forgiving to sharpen and more tolerant of debris in wood.
Full-Chisel: a square cutting corner suited to fast cutting in clean wood. It needs attentive sharpening and can lose its edge more quickly in dirty wood.
Cutter type does not determine compatibility. Match chain specifications first.
Standard 65Mn or Pro alloy steel?
Standard Series: 65Mn manganese steel, our everyday replacement range.
Pro Series: alloy steel. Check the individual product specifications when choosing a Pro chain.
Material is only one part of chain performance. Heat treatment, cutter geometry and maintenance also matter. Match the fit and cutter type first.
What comes in the pack?
The selected pack contains the number of chains shown in the pack-size option: 1PC, 2PC, 5PC or 10PC, where offered.
Every chain in a pack uses the selected specifications and cutter type. A chainsaw, guide bar and sharpening tools are not included unless the product listing explicitly says otherwise.
Sharpening & first-use checks
Follow your saw and chain instructions for installation, tension, lubrication and protective equipment. Confirm the chain specification and cutting direction before use.
Use the file diameter and filing angles specified for your exact chain. If you are unsure about the setup, stop and ask for fit help.
Shipping, returns & support
Available delivery options and shipping charges are shown at checkout. Review the store shipping and return policies before ordering.
Contact SawEdge with your order details or compatibility questions. Include a clear photo of the bar markings if you need fit help.
CHECK COMPATIBILITY
Will it fit your chainsaw?
Browse by brand, then confirm your bar and chain specifications.
Brand 01 — model list
Compatible models: to be verified.
Required chain specifications: match the pitch, gauge and drive-link count in this product listing.
Model name or bar length alone is not enough. A replacement bar may need a different chain.
Brand 02 — model list
Compatible models are being verified. Check your current guide-bar markings and match all three chain specifications.
Brand 03 — model list
Compatible models are being verified. Match pitch, gauge and drive-link count before ordering.
START WITH THE SPECS
Three numbers. One correct fit.
Check your guide bar or existing chain before you choose.
01 · PITCH
Pitch
Measure across three consecutive rivet centers and divide by two. Match the pitch required by your saw and guide bar.
02 · GAUGE
Gauge
Match the thickness of the drive links to the groove in your guide bar.
03 · DRIVE LINKS
Drive links
Count the drive links around your existing chain. These are the lower tabs that run in the bar groove.
Important: 3/8-inch Low Profile is different from standard 3/8-inch. Send a photo of your bar markings for help.
CHOOSE THE CORNER. MATCH THE JOB.
Round corner or square corner?
ROUNDED CUTTING CORNER
Semi-Chisel
More forgiving to sharpen and more tolerant of debris in wood.
SQUARE CUTTING CORNER
Full-Chisel
Suited to fast cutting in clean wood. A sharp edge needs attentive care.
Cutter type does not determine fit. Match the chain specifications first.
TWO SERIES. ONE RULE: MATCH YOUR SAW.
Standard or Pro?
Standard Series
65Mn manganese steel
Your everyday replacement range. Choose the correct chain specifications and the cutter type for your task.
Pro Series
Alloy steel
Explore the Pro range for your next job. Check the individual product specifications; fit and cutter choice still come first.
Heat treatment, cutter geometry and maintenance also affect performance.
READY FOR THE NEXT CUT
One for the saw. A spare for the job.
Choose a single replacement or keep matched spares on hand. Every chain in your pack uses the selected fit and cutter type.
1PC / 2PC / 5PC / 10PC
Available pack sizes are shown in the product options above.
WORKBENCH ESSENTIALS
Keep your edge working.
Add the tools that match your chain.
BEFORE YOU ORDER
A few things worth checking.
Follow the saw and chain instructions for installation, tension, lubrication and protective equipment.
Is bar length enough to choose a chain?
No. Match pitch, gauge and drive-link count. Different chains can fit the same nominal bar length, so check your saw and current guide bar before ordering.
Can I use an OEM number to check the fit?
An OEM part number is a useful starting point. Confirm it against the current bar and chain specifications, especially if the guide bar has been replaced.
Which file size does my chain need?
Use the file diameter and filing angles specified for your exact chain. A file is not selected by bar length alone. Check the chain instructions or ask us before choosing sharpening tools.
Can I change cutter type without changing fit?
Only select a replacement approved for your saw and guide-bar setup. Matching pitch, gauge and drive links is essential; also follow the saw manufacturer’s chain requirements.
Send your saw model, bar markings or OEM number. We’ll help you narrow it down.